Intended Use; Active Vibration Reduction (Avr); Quick-Release Chuck (Accessory); Service Indicator - Hilti TE 50 Manual De Instrucciones Original

can become live, presenting a risk of electric shock, if you accidentally
damage an electric cable.
Power tool use and care
▶ Immediately switch off the power tool if the accessory tool jams. The
power tool might twist off-line.
▶ Wait until the power tool stops completely before you lay it down.
3 Description
3.1 Overview of the product
Chuck
@
Function selector switch
;
Control switch
=
Supply cord
%
Side handle
&

3.2 Intended use

The product described is an electrically-powered combihammer with pneu-
matic hammering mechanism. It is designed for drilling in concrete, masonry,
wood and metal. The product can also be used for light to medium-duty
chiseling on masonry and surface finishing work on concrete.
▶ Operation is permissible only when connected to a power source providing
a voltage and frequency in compliance with the information given on the
type identification plate.

3.3 Active Vibration Reduction (AVR)

TE 50-AVR
This product is equipped with an Active Vibration Reduction (AVR) system,
which reduces vibration significantly.

3.4 Quick-release chuck (accessory)

The quick-release chuck is suitable for use with accessory tools with a
smooth, cylindrical shank or a hexagonal shank, e.g.:
• Drill bits for wood
• Drill bits for metal
• Mixing paddles
The quick-release chuck is fitted in the standard chuck.

3.5 Service indicator

The breaker is equipped with a service indicator LED.
6 English
Printed: 08.03.2017 | Doc-Nr: PUB / 5070997 / 000 / 03
1
Depth gauge
(
Service indicator
)
Theft protection indicator (op-
+
tional)
Active Vibration Reduction
§
AVR (only TE 50-AVR)