Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTAINING THE AIR FILTER
Failure to maintain the air filter can result in poor performance or
can cause permanent damage to the engine. Engine failure due to
improper air filter maintenance is not covered by the product warranty.
Cleaning the Air Filter
1. Open the air filter cover: unscrew the cover screw and swing the
air filter cover to the right (Fig. 17).
2. Remove the air filter (Fig. 18).
3. Wash the air filter in detergent and water. Rinse the air filter
thoroughly and allow it to dry.
4. Lightly coat the air filter with clean SAE 30 oil.
5. Squeeze the air filter to spread and remove excess oil.
6. Reinstall the air filter (Fig. 18).
NOTE: Make sure the metal screen is seated in the air filter housing
before reinstalling the air filter (Fig. 18).
NOTE: Operating the unit without the air filter and air filter cover will
VOID the warranty.
7. Close the air filter cover: insert the hooks on the air filter cover into
the slots on the air filter housing. Swing the air filter cover to the
left and align the cover screw with the cover screw hole (Fig. 19).
Tighten the cover screw to secure the air filter cover.
NOTE: Do not over tighten as this may strip the screw.
Air Filter
Housing
Screen
Cover Screw
Slots
Hole
13
Air Filter Cover
Cover Screw
Fig. 17
Air Filter
Fig. 18
Hooks
Fig. 19
Publicidad
