cosori CS158-AF-RXB Manual Del Usuario página 26

EN
TROUBLESHOOTING (CONT.)
Problem
The air fryer has a plastic
smell.
Display shows Error Code "E1".
Display shows Error Code "E2".
If your problem is not listed, please contact Customer Support (see page 27).
DECLARATION OF CONFORMITY
Arovast Corporation hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU, UK Radio Equipment
Regulations 2017 and all other applicable EU and UK directive requirements.
The complete declaration of conformity can be found at: https://cosori.com/euro/compliance.
26
Possible Solution
Any air fryer may have a plastic smell from the
manufacturing process. This is normal. Follow the
instructions for a Test Run (page 15) to get rid of the
plastic smell. If a plastic smell is still present, please
contact Customer Support (see page 27).
There is an open circuit in the temperature monitor.
Contact Customer Support (see page 27).
There is a short circuit in the temperature monitor.
Contact Customer Support (see page 27).