Brewing Coffee Later (Delay Brew); Cleaning And Maintaining Your Coffeemaker - Mr Coffee EHX Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. After the used coffee grounds have cooled,
carefully remove the filter basket and discard them.
Caution: The shower head cover is hot after brewing.
Always allow the coffeemaker to cool down before cleaning.
4. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the FRESH BREW™
TIMER feature. To turn the coffeemaker off, press
the SELECT/OFF button all lights will turn off.
5. Make sure the carafe is empty before starting to
brew coffee.
6. Be sure to turn your coffeemaker off when no
longer using it.
The Fresh Brew™ Timer Feature
The FRESH BREW™ TIMER feature lets you
know how long your coffee has been
waiting for you. At the start of the brew
cycle, the FRESH BREW™ TIMER feature will
automatically be activated.
Press the FRESH BREW™ TIMER button once (Figure 8)
and the clock time will change to show the amount of
time that has passed since brewing completed. Push
again to display current time.
NOTE: The BREW NOW green light must be on for the
FRESH BREW™ TIMER feature to operate. The time and
delay brew time cannot be set when the fresh brew
time is displayed.
BREWING COFFEE LATER
1. You must first set the time for when you would
like the coffeemaker to begin brewing your coffee
as described in "Setting the Clock and the Delay
Brew Timer" section.
16
2. Prepare your coffeemaker as described in "Adding
Water and Ground Coffee" section.
3. To activate DELAY BREW and program
your coffeemaker to brew coffee at
a later time, press the SELECT button
twice (Figure 9). The Amber DELAY
BREW light will turn on. The coffeemaker
is now set to automatically brew coffee
at the pre-set later time. At this time
the REGULAR light will turn on. You can select the
strength that you desire by pressing the BREW
STRENGTH button. (Amber for STRONG, green for
REGULAR)
4. At the pre-set time, the green BREW NOW light
will turn on and the DELAY BREW Amber light will
turn off, indicating the brewing has started in the
selected brew strength. The FRESH BREW™ TIMER
feature will start.
Figure 8
5. The coffeemaker warmer plate will keep your coffee
hot for 2 hours and then automatically turn off.
As a safety feature, your coffeemaker will NOT start
again automatically the next day. If you want your
coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set
DELAY BREW, by repeating Steps 2 and 3 above.
To cancel DELAY BREW: Press the SELECT button three
times until all lights turn off (Figure 9).

CLEANING AND MAINTAINING YOUR COFFEEMAKER

Daily Cleaning
Always unplug the coffeemaker and allow to cool
before cleaning.
Figure 9
17

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido