Brewing Coffee Now; Brewing Coffee Later (Delay Brew) - Mr Coffee FT Serie Manual Del Usuario

CAUTION! To reduce the risk of damaging the
decanter and/or the risk of personal injury, do not
add cold water to the decanter if the decanter
is already hot. Allow the decanter to cool before
using.

bREWING COFFEE NOW

1. After completing the steps in the Adding Water and
Coffee section and with the glass decanter and the filter
basket securely in place, turn the coffeemaker on by
pressing the BREW NOW button once. The BREW NOW
blue light will turn on to signal that the coffeemaker is on
and brewing (Figure 6).
2. To enjoy a more full flavored cup of coffee,
press the Brew Strength button once. The
STRONG Brew Strength red light will turn
on. The coffeemaker will remain in the
Brew Strength you have selected until you
change it back to REGULAR strength by
pressing the Brew Strength button or until
you unplug the machine (Figure 7).
3. After the used coffee grounds have cooled, carefully
remove the filter basket and discard them.
NOTE: The shower head cover is hot after
brewing. Always allow the coffeemaker to cool
down before cleaning.
4. Prior to making a second pot of coffee,
turn the coffeemaker off. This will reset
the FRESH BREW™ TIMER feature. To turn
the coffeemaker off, press the the SELECT
button until all lights turn off.
5. Make sure the decanter is empty before starting to brew
coffee.
6. Be sure to turn your coffeemaker off when no longer
using it.
14
FT Series_12ESM1.indd 15-16
The Fresh brew™ Timer Feature
The FRESH BREW™ TIMER feature displays the time since
the coffee brewing cycle started. At the start of the brew
cycle, the FRESH BREW™ TIMER feature will automatically be
activated.
Press the FRESH BREW™ TIMER button (Figure 8) will allow you
to toggle between the time of day and FRESH BREW TIMER.
While on the clock mode, the FRESH BREW
TIMER feature will keep counting.
NOTE: The BREW NOW green light must be on
for the FRESH BREW™ TIMER feature to operate.
The time and delay brew time cannot be set
when the fresh brew time is displayed.
bREWING COFFEE LATER
1. You must first set the time for when you would like the
coffeemaker to begin brewing your coffee as described
in Setting the Clock and the Delay brew Timer section.
2. Prepare your coffeemaker as described in Adding Water
and Ground Coffee section.
Figure 6
3. To activate DELAY BREW and program your coffeemaker
to brew coffee at a later time, press the SELECT button
twice (Figure 9). The yellow DELAY BREW light will turn
on. The coffeemaker is now set to automatically brew
coffee at the pre-set later time. At this time the brew
strength light will turn on. You can select the strength
that you desire by pressing the BREW STRENGTH button.
4. At the pre-set time, the green BREW NOW light will
turn on and the DELAY BREW yellow light will turn off,
indicating the brewing has started in the selected brew
Figure 7
strength. The FRESH BREW™ TIMER feature will start.
5. The coffeemaker warmer plate will keep your coffee
hot for 2 hours and then automatically turn off. Thermal
models will turn off at the end of the brew cycle.
Figure 8
15
3/28/12 2:16 AM