Brewing Coffee Now; Brewing Coffee Later (Delay Brew) - Mr Coffee CJX Serie Manual Del Usuario

BREWING COFFEE NOW

1. After completing the steps in the Adding Water
and Coffee section and with the glass decanter
and the filter basket securely in place, turn the
coffeemaker on by pressing the SELECT button
once. The BREW NOW green light will turn on to
signal that the coffeemaker is on and brewing
(Figure 6).
2. To enjoy a more full flavored cup of coffee, press
the Brew Strength button once. The STRONG Brew
Strength red light will turn on. The coffeemaker
will remain in the Brew Strength you have selected
until you change it back to regular strength by
pressing the Brew Strength button or until you
unplug the machine (Figure 7).
3. After the used coffee grounds have cooled,
carefully remove the filter basket and discard them.
NOTE: Always allow the coffeemaker to cool down
before cleaning.
4. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the FRESH BREW
TIMER feature. To turn the coffeemaker off, press
the SELECT button until all lights turn off.
5. Make sure the decanter is empty before starting
to brew coffee.
6. Be sure to turn your coffeemaker off when
no longer using it.
NOTE: Scalding may occur if the lid is removed
during brewing cycles.
The Fresh Brew ™ Timer Feature
The FRESH BREW ™ TIMER feature lets you know how
long your coffee has been waiting for you. At the
start of the brew cycle, the FRESH BREW
feature will automatically be activated.
Press the FRESH BREW ™ TIMER button once (Figure 8)
and the clock time will change to show the amount
of time that has passed since brewing completed.
Push again to display current time.
12
F 6
IGURE
™
F 7
IGURE
™ TIMER
F 8
IGURE
NOTE: The BREW NOW green light must be on
for the FRESH BREW™ TIMER feature to operate.
The time and delay brew time cannot be set
when the fresh brew time is displayed.
BREWING COFFEE LATER
1. You must first set the time for when you would
like the coffeemaker to begin brewing your
coffee as described in Setting the Clock and
the Delay Brew Timer section.
2. Prepare your coffeemaker as described in
Adding Water and Ground Coffee section.
3. To activate DELAY BREW and program your
coffeemaker to brew coffee at a later time, press
the SELECT button twice. The yellow DELAY BREW
light will turn on (Figure 9). The coffeemaker is
now set to automatically brew coffee at the
pre-set later time. At this time the brew strength
light will turn on. You can select the strength that
you desire by pressing the BREW STRENGTH button.
4. At the pre-set time, the green BREW NOW light
will turn on and the DELAY BREW yellow light will
turn off, indicating the brewing has started in the
selected brew strength. The FRESH BREW
feature will start.
5. The coffeemaker warmer plate will keep your
coffee hot for 2 hours and then automatically
turn off.
NOTE: Scalding may occur if the lid is removed
during brewing cycles.
As a safety feature, your coffeemaker will NOT
start again automatically the next day. If you
want your coffee to brew at the same time the
following day, simply add a new filter, coffee
and water and set DELAY BREW, by repeating
Steps 2 and 3 above.
To cancel DELAY BREW:
Press the SELECT button until all lights turn off
(Figure 9).
™ TIMER
F 9
IGURE
13