Publicidad
Idiomas disponibles
Idiomas disponibles
weight. So damage may occur on the door
shelf or rails.
3.6 The Water Dispenser
3.6.1 Mounting the Water Tank
1. Place the water tank in the plastic holder
on the door, pitched in the direction of
the arrow on the diagram.
2. After you have mounted the water tank,
push it down to firmly secure it in the
holder.
3. Add your drinks with the help of the
water tank top cover.
4. Release the side locking covers to
detach the water tank cover.
5. The drip tray must be placed.Then
gently press the valve lever to serve your
drinks.
1
3.6.2 Filling the Water Tank
• Remove the top cover of the water tank.
• Fill the tank up with water.
• Mount the top cover back on the water
tank.
Important: Do not use the water
dispenser for anything except water.
Important: If you leave water in the
tank for a long time, it will cause an
odour. In this case, clean the tank and keep
using it.
Important: Clean the water tank
before using it for the first time.
3.6.3 Cleaning the Water Tank
• Lift the water tank.
• Remove the tank cover by releasing the
side locking covers.
• Clean the tank with warm water and
reassemble the pieces that you have
removed.
3.6.4 Stowing the Water Tank
• Install the water tank as shown.
• Make sure that the tap and the hole
match each other while installing.
• Water flow may not be as expected if
EN - 42
2
3
Publicidad
