Gima KD-601 Manual página 7

TESTING AND TEST METHOD (LABORATORY REFERENCE PURPOSES ONLY)
1. Temperature accuracy of detection method: Put the thermometer into the water tank, the sensor of thermometer
must be placed approximately 2cm below the water surface and wait about 22 seconds, then press the ON/OFF
button to turn the thermometer on, then the thermometer will enter standard temperature measurement mode
and display water tank temperature with temperature unit symbol °C (°F) flashing.
2. Human clinical testing method: Turn on the thermometer, waiting for the temperature unit symbol °C (°F) flashes three
times, put the thermometer in the mouth or the armpit, about 22 seconds, the thermometer display the maximum
reading, it will issue "bi-bi-" sound.
ENGLISH