Publicidad
Idiomas disponibles
Idiomas disponibles
Press OK to conirm the setting.
3
7.2.1 Sensitivity levels and indications
Icon
Sensitivity Description
highest
Hear everything from your
baby. The speaker of the
parent unit is continuously on.
high
Hear all sounds from soft
babbling and louder. If your
baby does not make any
sound, the speaker of the
parent unit is off.
medium Hear sounds from soft cries
and louder. If your baby makes
softer sounds, the speaker
of the parent unit does not
go on.
low
The speaker of the parent
unit only goes on if the
baby makes loud sounds, for
instance because it is crying.
7.3 Eco Max mode
This baby monitor has a built-in Smart Eco mode
that automatically reduces the DECT signal from
the baby unit as the distance between parent unit
and baby unit becomes shorter. By reducing radio
transmission, it helps to save energy.
If you want to save even more energy and to stop
radio transmission, activate the Eco Max mode
in the menu of the parent unit. In this mode, the
DECT signal of the baby unit is switched off. As
soon as the baby makes a sound, the DECT signal
of the baby unit automatically switches on again.
C
Caution:
In Eco Max mode, the parent unit receives
feedback from the baby unit with a delay. When
your baby makes a sound, the baby unit irst has
to reactivate radio transmission before it can
send feedback to the parent unit.
7.3.1 Please note the following:
•
Before you select Eco Max mode, make sure
that the parent unit and baby unit are within
operating range, see section 'Operating range'
in chapter 'Using the baby monitor'. In Eco
Max mode you do not receive feedback when
the parent unit is out of range of the baby
unit. You can check the link by pressing any
button on the parent unit.
•
If there is no radio transmission from the baby
unit to the parent unit in Eco Max mode, the
sound level lights on the parent unit are off.
The sound level lights go on when the baby
unit reactivates radio transmission because
the baby makes a sound above the selected
sensitivity level.
•
If you want to operate the baby monitor in
Eco Max mode, make sure that the sensitivity
level is set between 1 and 3. If the sensitivity
level is set to level 4, the baby unit does not
switch off radio transmission in Eco Max mode.
15
Publicidad
