Publicidad
Idiomas disponibles
Idiomas disponibles
• This wine cellar is designed for built-under installation.
• Connect the cellar to a single socket, leaving a 30 mm gap between the back of the cellar and the wall.
Be careful to support it, so that your wine cellar is perfectly level (use of a spirit level is recommended).
This will prevent any movement due to instability, causing noise and vibration, and will ensure that the
door seals perfectly.
• This appliance is intended to be used exclusively for the storage of wine.
• This appliance is using flammability refrigerant. So never damage the cooling pipe work during the
transportation.
Attention
• Store wine in sealed bottles.
• Do not overload the cabinet.
• Do not open the door unless necessary.
• Do not cover shelves with aluminum foil or any other shelf material which may prevent air circulation.
• Should the wine cooler be left empty for long periods it is suggested that the appliance is unplugged,
and after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet in order to avoid
possible condensation, mold or odors forming.
CAUTION: please keep the appliance away from substance, which can cause ignition.
Ambient room temperature limits
This appliance is designed to operate in ambient temperatures specified by its temperature class marked
on the rating plate.
CLASS
Extended temperate
Temperate
Subtropical
Tropical
This refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to
32 °C.
SYMBOL
AMBIENT TEMPERATURES RANGE (°C)
SN
N
ST
T
From +10 to +32
From +16 to +32
From +16 to +38
From +16 to +43
32
Publicidad
