Publicidad
Idiomas disponibles
Idiomas disponibles
2. Use safety equipment. Always wear eye protection. Safety equipment such as dust
mask, non skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
3. Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tools with your fingers on the switch or plugging in power tools that have
the switch on invites accidents.
4. Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
5. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
6. If devices are provided for the connection of dust extraction and collection facilities,
ensure there are connected and properly used. Use of these devices can reduce dust
related hazards.
7. Only allow trained personnel to use the power tool. Apprentices may only operate the
power tool when they are over 16, when this is necessary for their training and when
they are supervised by a trained operative.
Power tool use and care
1. Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
2. Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
3. Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tools operation. If damaged,
have the power tool repaired by a qualified expert. Many accidents are caused by poorly
maintained power tools.
6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
7. Secure the workpiece. Use clamps or a vice to hola the workpiece. This is safer than
holding it with your hand, and also it frees both hands to operate the equipment.
Publicidad
