Warn Works 1700 Manual Del Usuario página 9

Wiring Instructions - Continued
• Install battery cables with red lead connected to the positive terminal of battery, and black lead to the
negative terminal of battery.
• Verify that all wiring connections are clean and tight.
Failure to observe these instructions could lead to severe injury or death
Before using the winch, verify the following:
Wiring to all components is correct.
There are no exposed wiring or terminals, cover any existing exposures with insulator plate,
terminal boots, heat shrink tubing or electrician's tape.
Warning
Shock & Fire Hazard
Never route electrical cables across sharp edges
Never route electrical cables through or near moving parts.
Always read and follow all wiring instructions included in operators guide.
Always insulate and protect all exposed wiring and electrical terminals
PAGE 9
.
73054 Rev. D0