LG WF-T1477TP Manual Del Usuario página 8

8
F
unction Information
Our machine provides various washing methods which suits various conditions and
types of laundry.
Different types of laundry washing
Fuzzy Wash (Normal Wash)
Use this Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page 16)
Wool Wash
Delicates clothes (lingerie, wool, etc.) which may be easily damaged can be washed. (refer to page 16)
The fibers of machine washable woolens have been specifically modified to prevent felting when they are
machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
Before washing your woolens check the care label for the washing instructions.
When washing woolens use a mild Detergent recommended for washing wool.
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
(The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.)
Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump
blockages (Ensure that the whole article is suitable for machine washing and not just the backing material.)
You may wish to handwash these articles and place them in the machine to spin dry.
Custom Program Wash
This setting allows you to store your CUSTOM wash conditions in the normal cycle memory. (refer to page 24)
Hand Wash
Use this program for load that need pretreatment.
After the prewash of 10 -15 minutes and draining, the washer will run to the nomal wash cycle. (refer to page 18)
Washing according to the condition of laundry
Quick Wash
Quick wash can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time. (refer to page 16)
Soak Wash
Soak Wash can be selected to wash heavily soiled laundry by soaking in water for some time to remove
dirt and grime.(refer to page 21)
Other washing method
Eco Save
Eco Save is the economical program to minimize water consumption. (refer to page 19)
Delay Start Wash
Delay Start Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly. (refer to page 22)
Spin Only
When the user needs Spin Only. (refer to page 20)