RCA LED42A55R120Q Manual Del Usuario página 9

TV Stand Installation
TV LED42A55R120Q is packaged with the bottom of TV stand separated from the cabinet. To setup the bottom of TV table
stand, please carry out the installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the LED LCD panel from being damaged.
Note:
1. The LED LCD panel is easy to scratch, so please choose an absolutely flat surface to place the TV, and use soft cloth or
cushion to protect the TV panel. Do not put TV on table directly.
2. Always unplug the AC cord first when installing or removing the stand.
Step Two
Take the bottom of stand. Please align the six holes of the bottom and six screwholes of the neck, then insert the bottom
to the neck like the picture exactly .
Step Three
Add the six washers between the bottom and the screws, then insert PWA4*12 screws (which are totally the same) and
tighten them.
Please refer to the picture given below:
The bottom view of the TV ( TV panel faces down)
Pedestal Screws Quantity Part #
PWA4 x 12mm 6pcs RS01PWA412HT
English-8