Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
The dishwasher will not
start
The dishes are not dry
enough
Stains and deposits on
dishes
The detergent was not
fully released from the
dispenser
The detergent dispenser
will not close
The water was not drai-
ned from the dishwasher
All manuals and user guides at all-guides.com
Possible cause
The dishwasher will not
start
The appliance is not
connected to the mains
power The Delay start
function is selected
Child Lock is enabled
(selected models)
The detergent dispenser
is empty
Dishes placed incorrectly
in the dishwasher
The selected programme
dose not include the
drying stage
Water too hard
Dishes placed incorrectly
in the dishwasher
An old rinse aid was used Use new rinse aid
Rinse aid dispenser is
empty
Too much detergent
The temperature of water
supplied to the dishwas-
her exceeds 70°C
The detergent may be
too old
The spray arm rotation is
blocked
The lid of the detergent
dispenser is malfunctio-
ning
The previous programme
was not completed or
was interrupted
Solution
Close the door carefully, make sure it is closed
fully
Check the connection to the power supply
To change the setting, refer to the Start Delay
section in the operating instructions
Deactivate the Child Lock function, refer to the Child
Lock section in the operating instructions.
Fill the rinse aid dispenser or increase the dis-
pensed amount
Rearrange the dishes in accordance with the
instructions.
Select the wash program that includes drying
In the case of very hard water, a water softener
should be installed
Rearrange the dishes in accordance with the
instructions.
Add rinse aid to the dispenser
Use less detergent if water is soft
Reduce the temperature of the water supply
Use a new/different detergent
Rearrange the dishes making sure that the spray
arm rotation is not restricted
Add detergent and rinse aid according to the
instructions
For information on how to select a suitable
wash programme, please refer to the operating
instructions
109
Publicidad
