Publicidad
Idiomas disponibles
Idiomas disponibles
LED WALL SWITCH OPERATION
1. LED Light: Press for ON/OFF.
2. Dimmer: Press multiple times to adjust brightness.
3. Night Light: Press for ON/OFF
4. Humidity Sensor: Press for ON/OFF.
5. Fan Speed - Low: Press for ON/OFF
6. Fan Speed - High: Press for ON/OFF
7. Main Power Switch: Press for ON/OFF
NOTE: Icon is illuminated when the feature is on.
CARE AND CLEANING
CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the
fuse from the fuse box.
• See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water more than 140°F.
BEFORE CLEANING
WARNING: RISK OF ELECTRIC SHOCK! Ensure the
electricity is shut off. Either remove the fuse or turn off the
circuit breaker before cleaning.
1. Remove the grille (B) by squeezing the mounting springs and
pulling the grille (B) down from the fan housing (A). Wipe grille
with a damp cloth.
2. Remove dust and dirt from the fan housing (A) with a vacuum
cleaner.
3. Wipe the fan housing (A) with a damp cloth and wipe dry.
Homewerks.com
1
2
3
4
6
5
7
1
2
3
9
B
A
A
Publicidad
