DESCRIPTION
1.
Counterweight
The counterweight is used for precise adjustment of the stylus's pressure on
the vinyl, to properly balance the tonearm.
2.
Anti-Skating Control
Use this to set the anti-skating function of the tonearm.
3.
Tonearm Lever
Use this lever to lower and raise the tonearm.
4.
Tonearm Lock (arm rest)
Use this to lock the tonearm in place when it's not in use.
5.
Head shell
This holds the stylus ("needle") in place and provides protection by means of
its removable stylus protection cap (not shown)
6.
Platter:
Place the record here when playing.
7.
33/45 RPM Switch (33/off/45):
Select 33 or 45 rpm for playing a vinyl, switch to "OFF" to pause the playing.
Switch to 33 or 45 again, to continue playing from the pause point.
3