Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARING CLEAN WATER SOLUTION TANK WITH DETERGENT
2.4 Unscrew measuring cap from
back side of Clean Water Solution
Tank.
2.5 Fill measuring cap with solution
5 times (approximately 4 oz.) and
pour into Clean Water Solution Tank.
2.6 Fill remaining Clean Water
Solution Tank with hot tap water.
Replace cap.
• Use only Dirt Devil
Brand Detergents.
®
• Using other cleaning solutions may cause excessive foaming. Excessive foam will cause the float to shut off the
vacuum prematurely.
• Using other detergent will void your warranty.
CARPET CLEANING
2.7 Place bottom of Clean Water
Solution Tank into cleaner and
rotate top into position until the
lever snaps into place.
2.8 Plug cord into electrical outlet.
Step onto handle release pedal to
put into cleaning position.
2.9 Turn on cleaner.
• NOTICE •
• Never leave unit unattended
with power on.
• Turn OFF when emptying and
filling tank.
• Do NOT oversaturate the carpet.
All manuals and user guides at all-guides.com
2.4
2.5
• IMPORTANT •
2.7
8
2.6
2.8
2.9
POWER
ON/OFF
SWITCH
Publicidad
