Ecler AMIC24 Manual De Instrucciones página 18

5.10. Fully displayed panel
Fully displayed channel panel graphically shows parameters related to the channel audio
processing function offered by AMIC24 (see paragraph Features).
A fully displayed processing channel panel displays all editable parameters, grouped in sections.
5.10.1. INPUT
Input section contains INPUT SELECT, INPUT GAIN, MUTE and INVERT
parameters plus a level meter graphical display.
•
INPUT SELECT selects this channel input amongst available sources.
Options are "Input Ch1", "Input Ch2", "Input Ch1+Ch2" (sum of the input
channels) or "Signal Gen.". This last one refers to an internally generated
signal through the signal generator controls from the main panel.
•
INPUT GAIN is made of a fader and a linked numerical value. With this
parameter you can apply a gain up to +12dB or an attenuation up to –84dB
to the selected input signal.
•
MUTE allows software to mute audio.
•
INVERT changes the input signal phase (of 180 degrees).
Level meters display the channel input signal level after gain and the output
signal after all processing (when .amiclab2 is connected with hardware). Used
scale is the silk printed one on the fader.
18
All manuals and user guides at all-guides.com