Publicidad
Idiomas disponibles
Idiomas disponibles
2. INSTALLATION
The AMIC24 can be mounted in a standard 19" rack (482.6 mm) taking up one height unit
(44 mm).
Given the small power consumption of the unit, no ventilation is required. Nevertheless, it is
advisable not to expose the unit to extreme temperatures as well as ensure a dry and dust-free operating
environment.
It is important not to place the processor next to electrical noise sources such as transformers,
voltage dimmers, motors, etc. or their mains supply cables. The metal cover of the device should never
be removed under any circumstance for that same reason.
The AMIC24 operates with alternate current (AC) between 90 and 264V at 47 to 63Hz. This
device features an oversized power supply which adapts itself to any mains voltage around the world,
without the need of manual adjustment.
Even though the noise produced by powering up is minimum, it is always advisable to follow this
power up sequence: signal sources, mixing unit, processor and, finally, power amplifiers. The power
down sequence must follow exactly a reverse order. By closely following this sequences, all peaks or
transients produced by switching on and off devices do not affect the next devices in the chain and, of
course, never reach the loudspeakers, which are extremely sensitive about this.
3. INTRODUCTION
3.1. About AMIC24
The AMIC24 has a powerful and fully programmable digital signal processor with two high quality
audio input channels and four output ones as well as a USB computer link. Additionally, AMIC24 offers
two external connections for remote volume control.
NOTE: A maximum of 16 inputs in parallel
can be connected to the same control
potentiometer. All amplifiers ground must be
linked.
All manuals and user guides at all-guides.com
5
Publicidad
