Trust 17680 Guía De Instalación Rápida página 4

OXXTRON 1000VA UPS – User's Manual
Package contents (Package contents)
On/Off button
Red
Status LEDs:
Yellow
Green
AC input port
Fuse holder
Output
Loop through cables (2x)
Installation (Installation)
- Turn off your computer.
- Disconnect the AC input cables from your computer and from its monitor.
-
Connect your computer's AC input cable to the UPS' AC input port (
Use loop through cables ( ) to connect the computer and its monitor to the UPS backup outputs
-
( ).
- Turn on the UPS.
- Charge the UPS for 8 hours.
- The equipment connected to the UPS can be switched on.
Replacing the fuse (Replacing the fuse)
- Make sure the UPS is completely off, (disconnect mains power).
- Use a spare fuse of same rating (250V, 5A)!
- Open the fuse holder ( ).
- Replace the fuse and close the fuse holder.
).
2