Publicidad
Idiomas disponibles
Idiomas disponibles
MILES OR KILOMETERS SETTING:
The default setting is miles. Press and hold SET and MODE together for 2 seconds to change to
kilometers.
SET TARGET VALUES:
1. Press SET to select a target value. CADENCE will start to flash.
2. Press and hold SET and the value will increase continuously.
3. Press MODE to enter.
4. TIME will flash.
5. Press SET to select a value.
6. Press MODE to enter.
7. Repeat to select values for DIST and CAL.
1. TARGET: the preset CADENCE.
2. In STOP mode, press SET key to enter the TARGET setting in stop mode. Press SET to increase
the CADENCE five at a time. The setting change is 15→20→ ......110→115→120→15→20→......
→115→120→15→20→ ......
3. The setting range of 15 -120 (Preset value is 60 CADENCES which equals six bars).
4. Each bar equals 10 CADENCE. Total is 12 bars.
displays two). The maximum arrows displayed is 12.
When Current CADENCE is less than Target CADENCE,
the up arrow next to the bicycle will be displayed.
Each arrow equals 10 CADENCES (1-10 CADENCES displays one arrow, 11-20
25
Publicidad
