JVC DLA-X90R Manual De Instrucciones página 54

3
Adjustments and settings in the menu (continued)
Color Temp.
Gamma
Normal
A (3D)
B (3D)
Film 1
Film 2
Film 3
Film 4
A
B
C
D
Custom 1
Custom 2
Custom 3
Dark/Bright Level
Dark Level
Bright Level
Picture Tone
White
Red
Green
Blue
Contrast
Brightness
Color
Tint
Advanced
Reset
54
Operation
It is possible to set the color temp.
To "[1-1] Color Temp." of the submenu
It is possible to set the gamma curve. Please set to your preference.
Settings: Normal, A (3D), B (3D), Film 1, Film 2, Film 3 Film 4, A, B, C, D, Custom 1,
Custom 2, Custom 3
Typically we recommend this setting.
(*) You cannot configure Normal Mode when the "Picture Mode" is set to "Film" or "3D".
A (3D), B (3D) can only be set, if the "Picture Mode" is "3D".
This is a standard gamma curve for 3D.
A (3D) will be brighter.
Film 1, 2, 3, 4 can only be set if the "Picture Mode" is set to "Film" .
This is a gamma curve that approximates the characteristics of an Eastman Kodak
Company film for movies.
This is a gamma curve that approximate the gamma curve characteristics of a
cinematographic film made by the FUJIFILM Corporation.
This is a gamma curve that is even more focused on tone for the gamma of Film 1.
This is a gamma curve that emphasizes more contrast for the gamma of Film 2.
(*)You cannot configure A, B, C, and D when the "Picture Mode" is set to "Film" or "3D".
In regard to normal gamma, this is a gamma curve focused on tone.
This is a gamma curve for the film's unique S curve.
This is a gamma curve that – in regard to the gamma of B – emphasized even more the
feeling of contrast.
For normal, this is a gamma curve where the intermediate gradations look very bright.
(*) Custom 1, 2, 3 cannot be configured during 3D signal input and when the "Picture
Mode" is set to 3D.
Under submenu "[1-2-2] Custom Gamma", it is possible to change the gamma curve and
save it.
The initial value of Custom 1, 2, and 3 is the same as for "Normal".
Compensating darkness / brightness of an area.
(*) It is possible to set it unless the "Picture Mode" is set to "Film".
Settings: (makes dark areas darker) -7 to 7 (brightens dark areas)
Settings: (darkens bright areas) -7 to 7 (makes bright areas brighter)
You can reproduce the intensity of the exposure image.
(*) This function can be configured when the "Picture Mode" is set to "Film" and "Gamma"
is set to "Film 1-4".
(*) "Video Tone" is displayed when the "Picture Mode" setting is anything except "Film".
Settings: (The more under-exposure, the darker) -16 to 16 (the more over-exposure, the
brighter)
Settings: (under-exposure to for red), -16 to 16 (over-exposure for red)
Settings: (under-exposure for green) -16 to 16 (over-exposure for green)
Settings: (under-exposure for blue) -16 to 16 (over-exposure for blue)
Adjusts the contrast of the video images.
Settings: (blackish) -50 50 (whitish)
You can adjust the brightness of the video image.
Settings: (dark) -50 to 50 (bright)
Adjust the color intensity of the video images.
Settings: (dim), -50 to 50 (saturated)
Adjusts the image tint of the video images.
Settings: (reddish) -50 to 50 (greenish)
Functions such as contour correction, custom gamma and color management can be set
to sub-menu "[1-2] Advanced".
Sets settings to default factory settings.
90 70
[Normal]
[0]
[0]
[0]
[0]
[0]
[0]