Descargar Imprimir esta página

LG DLG2601W Guía Del Usuario E Instrucciones De Instalacion página 28

Publicidad

Idiomas disponibles

Idiomas disponibles

CONTROL PANEL FEATURES
Following are instructions for starting and using your new dryer. Please refer to specific sections
of this manual for more detailed information. Important Warning: To reduce the risk of fire,
electric shock, or injury to persons, read this entire manual, including the Important Safety
Instructions, before operating this dryer.
1
1
POWER ON/OFF BUTTON
Press to turn the dryer ON. Press again to
turn the dryer OFF.
NOTE: Pressing the ON/OFF button during
a cycle will cancel that cycle and any load
settings will be lost.
2
CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle.
Once the desired cycle has been selected, the
standard presets will be shown in the display.
On MANUAL DRY cycles, these settings can
be adjusted using the cycle settings buttons
anytime before starting the cycle.
3
START/PAUSE BUTTON
Press this button to START the selected
cycle. If the dryer is running, use this button
to PAUSE the cycle without losing the
current settings.
NOTE: If you do not press the START/PAUSE
button to resume a cycle within 4 minutes,
the dryer automatically turns off.
MORE TIME/LESS TIME BUTTONS
4
Use these buttons with MANUAL DRY and TIME
DRY cycles to adjust the drying time. Press the
MORE TIME button to increase the selected
manual cycle time by a minute; press LESS
TIME to decrease the cycle time by a minute.
28
All manuals and user guides at all-guides.com
3
2
6
5
CYCLE SETTING BUTTONS
5
Use these buttons to select the desired cycle
settings for the selected cycle. The current
settings are shown in the display. Press the
button for that option to view and select
other settings.
TIME AND STATUS DISPLAY
6
The display shows the settings, estimated
time remaining, options, and status
messages for your dryer.
OPTION BUTTONS
7
The OPTION buttons allow you to select
additional cycle options. Certain buttons
feature a special function (see the following
pages for details) that can be activated by
pressing and holding that option button.
4
7

Publicidad

loading