6. HOW TO USE THE FASTENING STRAPS
Straighten the fastening straps from the bottom of the mattress to the opposite side,
and then let the buckle at the straps end,(or plastic plate), snap between the mattress
and the bed. Finally, adjust the length of the buckle based on the bed width until there
is no gap between the fence and the bed.
Bed rail
The fastening belt
Adjust strap
Adjust strap
PP board
Mattress
Bed
4
FOLD
1. Turn both sides of the guardrail from the outside to the inside at 180 degree, as shown in the
below picture.
17