TECHNICAL SPECIFICATIONS OF PRODUCT
■ Power supply: Completely autonomous comprising photovoltaic cell (64 mWp)
■ Transmission Frequency: 433,92 Mhz with built-in antenna
■ Radio encoding: TTS (compatible with receivers controlled with transmitters in the
series SKIMY)
■ Radiated power: approx. 1 mW (erp). In optimal conditions this corresponds to a
range of approx. 100 m in open fi eld or 20 m inside buildings
■ Protection rating: IP 44
■ Impact resistance: up to 0,5J, according to standard EN 60068-2-75; hail: H3-H4
Torro scale
■ Operating temperature: from - 20°C to + 55°C
■ Dimensions (mm.): (volume) 125 x 250 x 100 (H)
■ Weight: 250 g
Wind sensor
■ Measurement range: from 0 to 125 Km/h
■ Resolution: 1 km/h
■ Accuracy: ± 2% F.S
■ Conversion constant: 0,26 rev/s - km/h
■ Threshold adjustment: from 5 to 60 Km/h
■ Pre-alarm: after 24 h without wind
Sun sensor
■ Measurement range: from 3 to 80 Klux
■ Resolution: 1 Klux
■ Accuracy: ± 5% F.S
■ Threshold adjustment: from 5 to 60 Klux
■ Pre-alarm: after 24 h without variations in sunlight
–––––––
Note:
– (*) The range of the transmitters can be infl uenced by other devices operating in the vicinity at the same
frequency as the transmitter (for example radio headphones, alarm systems etc.) causing interference
with the receiver. In the event of strong interference, STOBAG cannot provide any guarantee as regards
the effective capacity of its radio devices.
– All technical characteristics refer to an ambient temperature of 20°C (± 5°C).
– STOBAG reserves the right to apply modifi cations to the product at any time when deemed necessary,
while maintaining the same functionalities and intended use.
We hereby declare that this device conforms to the fundamental requirements
and relevant provisions of the CE directives.
Declaration of conformity: www.stobag.com
32
www.stobag.com