Adjusting the Antenna
The antenna at the rear panel of the unit should be fully extended to ensure a good FM reception. Alter the antenna position
for the best reception.
FM RADIO OPERATION
Auto Scan
1. Turn on the unit in FM mode.
2. Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 20 storage).
Manual Scan
1. Press the
or
button repeatedly to tune to a different frequency.
2. Alternatively press and hold the
Storing FM Presets
You can save up to 20 FM stations.
To use the unit buttons to store the preset:
1. Tune to the station you wish to store.
2. To save it to the preset 1 or 2 or 3, press and hold the numeric button respectively. Then it will save to that preset number.
3. To save it to other preset channel from 4 to 20, press and hold the numeric button "4+". "NUMBER" will blink.
4. Press the
or
button to select the desired preset number to store.
5. Press the PROGRAM button to store.
To use the remote control button to store the preset:
1. Tune to the station you wish to store.
2. Press and hold the MEMORY button, "NUMBER" will blink.
3. Press the
or
button to select the desired preset number to store.
4. Press the MEMORY button to store.
Recall Stored FM Presets
To use the unit buttons to recall the preset :
1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it will tune to that preset channel.
2. To recall other preset channel from 4 to 20, press the numeric button "4+".
3. Press the
or
button to select the desired preset number to recall.
4. Wait till the station will start.
To use the remote control button to recall the preset:
1. Press preset number on keypad for the desired preset number to recall.
2. Press the ENTER button to store.
Stereo/Force Mono Selection
When receiving a Stereo FM radio station, press the
switch between stereo audio and force mono audio.
FM RADIO
or
button to automatically search to the next available station.
button on the unit (or MONO/ST. button on the remote control) will
-10-