Lenco SCD-120 Manual De Usuario página 12

MP3 Disc or MP3 USB mode
1. In stop mode press the PROGRAM button, the display shows the program number and the folder number.
2. Press the FOLDER button (or the FOLDER˄/FOLDER˅ button on the remote control) to select the desired folder.
3. Press the PROGRAM button to save the desired folder.
4. Press the or button to select the desired track.
5. Press the PROGRAM button to save the desired track.
6. Repeat steps 2-5 to store up to 99 programmed tracks.
7. Press the button to start playing the programmed tracks.
8. To clear the program play, press the
9. During program play you can also do the "Repeat One" or "Repeat All" operation, however the random play is not
supported.
Note:
- The USB port is only for playback purpose, NOT for external device charging
- Besides playing CDDA audio disc, the unit can also play MP3 file format in CD/USB operation. However, WMA file and
others are not supported.
- If your USB device is loaded with MP3's but the display keeps showing "NO" on the display, the format of your USB device
might not be compatible with the unit.
- The unit supports USB version 1.1 and 2.0.
- The unit supports USB devices with capacity up to 32GB.
- The unit may not be compatible with all USB devices, this is not a problem of the unit.
- For MP3 playback, a maximum of 255 folders with a maximum of 999 files is supported.
- Due to the USB file read/write mechanism, the first file written to the usb device will be played first and the last file written
will be played last. (The unit will not sort alphabetically)
Folder Select (MP3 file only)
During MP3 playback press the FOLDER button (or the FOLDER˄/FOLDER˅ button on the remote control) to change to the
folder.
In stop mode press the FOLDER button (or the FOLDER˄/FOLDER˅ button on the remote control) to change to the folder.
Then press the or button to select your desired track to play. Press the
Please follow the pairing instructions below to link the unit to your Bluetooth device.
1. Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show "BT AUDIO". It will start
searching and will display a flashing "BT AUDIO".
2. If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display and the
Bluetooth status indicator will keep on flashing. Turn on the Bluetooth function of your device and enable the search until
"Lenco SCD-120" is found. Select "Lenco SCD-120" on the Bluetooth device to make connection. Enter the pass code
"0000" if required.
3. After successfully paired the unit will display the steady "BT AUDIO".
4. You can now start playing music from your smartphone wirelessly to the speaker.
5. You can press the button to pause or resume the playback.
6. You can press the or
Note:
• Press and hold the PAIR button will disconnect the current connection and start to search another new Bluetooth
device.
• This product has a bluetooth reception function, you cannot transmit any bluetooth sound with it (Bluetooth headset or
earset don't receive signal of the SCD-120): this means that you can receive wirelessly a bluetooth sound signal from
an external source like a smartphone.
button twice or change to another mode.
BLUETOOTH
button to search to the previous or next song.
-12-
button to start track playback.