Bissell PROHEAT ADVANCED 1846 Manual De Instrucciones página 6

Assembly
WARNING
Do not plug in your deep cleaner until you are familiar with all instructions
and operating procedures.
Your deep cleaner comes in four
easy-to-assemble components and
an accessory bag.
- Upper Handle
- Base
- Upper Hose Wrap
- Lower Hose Wrap
1
1
Slide handle assembly onto lower body
and secure with two long screws.
3
1
Attach Lower Hose Wrap by sliding it in place on the
lower body assembly and securing it with 2 short screws.
Attach Tough Stain Tool to end of hose.
6
www.BISSELL.com
The only tool you will need to assemble
your deep cleaner is a Phillips-head
screwdriver.
2
2
Attach Upper Hose Wrap to back of
Upper Handle by pushing into open slots
and sliding down until it snaps into place.
3
2
4
Wrap flex hose around
hose wrap and secure
it into notched out
holder as shown.