Kohler K-22847-BL Instrucciones De Instalación página 16

9. Fill the Soap Reservoir
Dispensing Tube
Check
Valve
NOTE: The 1600 ml soap reservoir is included. Refer to kohler.com/serviceparts for
the optional 800 ml soap reservoir.
For 800 ml soap reservoir bottles, remove the check valve from the dispensing
tube. Cut 2" (51 mm) from the dispensing tube so that the tube fits without any
coiling. Reinstall the check valve.
NOTE: Refer to the Soap Requirements section for more information on the soap
requirements for this product.
IMPORTANT! Rinse the empty soap reservoir with clean warm water before first
use.
Fill the soap reservoir with KOHLER brand foaming soap or foaming soap with
1 cP – 100 cP to the "Max Fill" line. Do not over ill the soap reservoir.
Insert the dispensing tube from the control unit into the soap reservoir.
Press the soap reservoir into place until an audible click is heard.
1419080-2-A
Soap Reservoir
(Refillable)
16 Kohler Co.