HQ-Power HQLP10002 Manual Del Usuario página 8

4.3 Connection

Have a qualified electrician carry out the electric connection.

Connect the device to the mains with the power plug. All devices must be powered
directly off a grounded switched circuit. Do not connect to a dimmer pack.

The installation has to be approved by an expert before the device is taken into service.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 bracket
2 display + menu buttons
6. Operation
The device can be used in the following modes:

stand-alone mode

master/slave

with a DMX-512 controller.
6.1 Control Panel
Access the control panel functions using the four panel buttons located around the display.
Menu scroll through the menu options
upwards through the menu list
downwards through the menu list
Enter confirm a selection
6.2 Menu
mode
DMX mode
static colours
auto
sound
speed
mic sensitivity
colour edit
dimming
silent save
slave
IR
V. 01 – 05/07/2017
HQLP10002/HQLP10003
programming
Addr
Stat S 01-25
Auto Au 1-4
Soun So 1-4
SPEE SP 1-9
SEnS SE 1-9
r000-255
g000-255
Colo
b000-255
u000-255
dIMM dl 1-9
SILE on-off
SLAU
InFr on-off
3 DMX input and output
4 power input
description
9CH
5CH
4CH d001-d512
3CH
2CH
static colours
auto programme
sound programme
speed
microphone sensitivity
red
green
blue
white
dimming brightness
sound mode silent scene
Slave slave
IR on-off
8 ©Velleman nv