D Devices D_SCALER S Manual De Instrucciones página 11

Picture 7
a) Snip the water pipe at a distance of 10cm to 20cm from the water entrance.
b) Turn on the power switch, get through to the power.
c) Connect the multi-function syringe of the dental unit to the water pipe.
d) Screw off the scaling tip or pull out the handpiece.
e) Step on the foot switch.
f) Turn on the switch of the multi-function syringe, press the air or water into the water pipe to clean and eliminate the
impurity.
[Note 3 ] Tf the scaling tip has been screwed on tightly and there is fi ne spray too, the following phenomena show that
the scaling tip is damaged:
a) The vibrating intensity and the pulverization degree become weak obviously.
b) During operating, there is some buzz when the scaling tip is working.
[Note 4] Tf the power cable connected to the grid electricity end of the power adapter is damaged, as the power cable
is not removable, for your safety, please contact a professional for replacement.
4. Cleaning, Disinfection and Sterilization
The cleaning, disinfection and sterilization of handpiece, tip, and wrench (include torque wrench and Endo wrench)
11