Publicidad
Idiomas disponibles
Idiomas disponibles
7
Lift out the gray interlock button in the side
of the door.
Make sure to remove the spring with the
interlock button and to keep the two together.
Set the interlock button aside. Do not confuse
this with the interlock buttons from the top of the
outer door.
8
Remove the side lock rod.
Remove the side lock rod from the lower hinge
bracket by lifting the top end of the rod and
sliding it toward the top of the door. The spring
should remain attached to the lock rod. Set the
lock rod aside.
9
Reverse the upper hinge assembly and hinge
filler.
a. Remove the screw connecting the upper
hinge assembly to the top lock rod and set it
aside.
b. Lift out the upper hinge filler (on the right) and
set it aside.
c. Lift out the upper hinge assembly (on the left).
d. Slide the upper lock rod to the right. Rotate
e. Rotate the hinge filler 180 degrees and install
Spring
f. Insert and tighten the screw connecting the
INSTALLATION
the upper hinge assembly 180 degrees, and
install it over the lock rod on the right, where
you removed the upper hinge filler. Press
firmly to fully seat the hinge assembly.
it on the upper left side of the door.
upper hinge assembly to the top lock rod,
removed in step a.
Assemble screw
17
Publicidad
