D-Link DCS-932 Guía De Instalación Rápida página 3

PRODUCT
SET-UP
CD SET-UP WIZARD
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
to configure dcs-932 using a static Ip, connect your dcs-932 directly to your computer's ethernet
port using the ethernet cable provided. ensure that your computer is also set to a static Ip of
address of type 192.168.0.x. then connect the power cable on the dcs-932. the dcs-932 power
light will display as solid red first, then shortly turn to green.
then simply open a browser window and enter the Ip address in the browser address field:
DCS-932
SET-UP WIZARD CD
the cd contains all of the instructions required to set-up dcs-932
INSERT CD
Insert the cd into the cd drive of your computer. the set-up
wizard should start automatically. make sure that your internet
connection is active. (do not plug in dcs-932 yet)
SET-UP WIZARD
select your language from the list of options and follow the
steps within the wizard to complete the set-up of dcs-932
Ip addRess: http://192.168.0.20
useRname: admin
passWoRd:
3