THOMSON DSC 525W Manual Del Usuario página 33

MOTORISED 1080P IP WIFI CAMERA
Important: To be configured for the EzLink function, your camera must use the default user name and
password. Reset your camera if necessary by pressing the "Reset" button under the camera for at least 15
seconds.
• Then connect your smartphone or tablet to the WiFi network that your camera will then use.
Important note: Your camera is not compatible with 5 GHz wireless networks
(802.11ac WiFi network). Do not connect your smartphone or tablet to this type of network.
• Click the icon then scan the QR code on the camera.
Once the code has been read, your smartphone or tablet will ask you to choose between LAN and WiFi.
Select WiFi and press "prêt(e) " (ready), please enter the key to the WiFi network you are connected to, to
be able to transmit it to the camera.
2.2 - WIRELESS CONNECTION: WPS FUNCTION
If your box or router has a WPS (WiFi Protected Setup) function, you can use the WPS/reset button under
the camera for quick connection to your WiFi network. Refer to your modem/router/box user guide to find
out whether you have the WPS function and, if so, how to use it.
Modem/router
connected to
the internet
camera
Mains adapter
www.thomsonsecurity.eu
Reset
camera
C - INSTALLATION
9
EN
EN