Basic button instructions
Item
Button
1.
2.
3.
4.
Opening your life
Figure 13
Short press: Con rm setting.
Long press: Enter the function menu setting.
Short press:
a) In the Setting Status, short press CODE, it will exit the current operation and return to the standby interface.
b) In the Standby Status, short press the CODE, A dot will be indicated in the corner, now entering the code
leaning mode.
Now rst click the button on the hand transmitter you want to use, the dot may disappear ,then press again the
same button on the hand transmitter, the dot will ash, here, the code learning is nished.
Long press:
Clear the coded remote.
Press and hold CODE button until a letter "C" is indicated on the display.
All stored remotes will be deleted.
Short press: Open the door.
Long press: Increase the resilience.
Press and hold the DOWN button, after 4 seconds, it will scroll to display 0-1-2, choose the number you want.
1=increase the resilience 25% 2=increase the resilience 50%.
Short press: Close the door.
Long press : Restore Factory Settings.
Keep press DOWN button, after 4 seconds, it will scroll to display
restart.
PS: Restart means all settings are back to factory settings, all learning things need to be done again except the
transmitter learning code.
Opening your life
Description
8
Raptor
Code:
Figure 14
, then the garage door opener will
www.accessmatic.com
RP120