Publicidad
Idiomas disponibles
Idiomas disponibles
LED lights do not work
Door is automatically reversed to
the upper limit before the door
closed completely
Door automatically stops while
opening
The remote control cannot be
used or the operation distance is
short
Cannot code in the new remotes
Digital display
Standby, Digital display
The opener is working while the
door is not moving
The battery do not supply power
Other abnormal issues
Digital display
Opening your life
Opening your life
1. The LED wire is not plugged
2. The LED is broken
3. The circuit board is broken
In operation with automatic reverse
function
The door is not installed correctly
There is some block on its moving
In operation with automatic protect
function when obstruction is detected
The door is not installed correctly
There is some block on its moving
1. Flat battery
2. Antenna is loosed or not well
extended
3. Interference around nearby
New remote control is not compatible
with opener
Stored remote code is full
Door in door function e ects
Motor shaft sleeve worn
1. Flat battery
2. The battery wire is plugged inversely
3. The battery wire is broken
External devices is not compatible with
the opener
External devices is not compatible with
the opener
18
Raptor
1. Check the LED wire
2. Replace the LED
3. Replace the circuit board
1.Check the block position of the door and re-set the limit
traveling
2. Increased force number for automatic reverse
1.Check the block position of the door and re-set the limit
traveling
2. Increased force number for automatic reverse
1. Replace new battery
2. Extended the antenna on the opener
3. Get rid of interference
Choose our remote control only
Delete all stored codes
(Refer the instruction manual)
Check the door in door switch
Replace the motor shaft sleeve
1. Charge the battery
2. Open the cover, check "+" "-" of the battery
3. Replace the battery wire
Remove all the external devices. If the abnormal issues
still exist, replace the circuit board
Remove all the external devices. If the abnormal issues
still exist, replace the circuit board
www.accessmatic.com
RP120
Code:
Publicidad
