Location Requirements
Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft
areas.
Do not obstruct the flow of combustion and ventilation air.
Clearance to combustible construction for grill:
◼ A minimum of 36" (91 cm) must be maintained between the
front of the grill hood, sides, and back of the grill and any
combustible construction.
◼ A 36" (91 cm) minimum clearance must also be maintained
below the cooking surface, and the grill shall not be used
under overhead combustible construction.
Rotisserie (accessory is not included)*
If you equip your grill with a rotisserie, a 6" (15.2 cm) minimum
clearance is needed for the rotisserie motor.
A grounded, 3-prong outlet located to the left of the grill is
required.
*See "Assistance" section to order.
INSTALLATION REQUIREMENTS
Product Dimensions
The model/serial number rating plate is located on the inside of
the left cabinet door. See the following illustration.
A
A.
Model/serial number plate
37