Publicidad
Idiomas disponibles
Idiomas disponibles
1English1
SPECIFIC SAFETY RULES AND SYMBOLS
CAUTION
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact with 'live' wire will also
make exposed metal parts of the tool 'live' and shock the operator.
Keep hands away from moving parts. Never place your hands near the moving
area.
Use extra caution when moving overhead and pay particular attention to
overhead wires, which may be hidden from view. Anticipate the path of falling
branches and debris ahead of time.
Do not operate this tool for long periods of time. Vibration caused by the operating
action of this tool may cause permanent injury to fingers, hands, and arms. Use
gloves to provide extra cushion, take frequent rest periods, and limit daily time of
use.
This power tool is intended to function as a buffer or polisher. Read all safety
warnings, instructions, illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in electric shock, fire
and serious injury.
Wear personal protective equipment. Depending on application, use face shield,
safety goggles or safety glasses. As appropriate, wear dust mask, hearing
protectors, gloves and shop apron capable of stopping small abrasive or
workpiece fragments. The eye protection must be capable of stopping flying debris
generated by various operations. The dust mask or respirator must be capable of
filtrating particles generated by your operation. Prolonged exposure to high intensity
noise may cause hearing loss.
Keep bystanders safe distance away from work area. Anyone entering the work
area must wear personal protective equipment. Fragments of workpiece or of a
broken accessory may fly away and cause injury beyond immediate area of
operation.
Do not run the power tool while carrying it at your side.
Regularly clean the power 'tool's air vents. The motor's fan will draw the dust
inside the housing and excessive accumulation of powdered metal may cause
electrical hazards.
Do not operate the power tool near flammable materials. Sparks could ignite
these materials.
Maintain a firm grip on the power tool and position your body and arm to allow
you to resist vibration forces.
Never place your hand near the rotating part.
Wear appropriate personal hearing protection during use. Under some
conditions and duration of use, noise from this product may contribute to hearing
loss.
English
-6
Publicidad
