Publicidad
Idiomas disponibles
Idiomas disponibles
5.
- Select a next preset station.
- Adjust time.
6. TU-
- Tune to a radio station backward.
7. PROG
- Preset stations for tuner.
8. ALARM 1
- Set the alarm 1 timer.
- View alarm 1 settings.
9. SLEEP
- Set the sleep timer.
10. EQ
- Select a preset sound effect: Classic, Rock, Jazz,
Pop, FLAT.
11. MUTE
- Mute or resume the sound.
12. CLOCK
- Press and hold this button in the standby mode to
set the clock.
13. TU+
- Tune to a radio station forward.
14.
- Select a previous preset station.
- Adjust time.
15. ALARM 2
- Set the alarm 2 timer.
- View alarm 2 settings.
16. VOL+ /VOL-
- Increase/Decrease the volume level.
Preparations
Prepare the Remote Control
The provided Remote Control allows the unit to be
operated from a distance.
Even if the Remote Control is operated within the
effective range (6m), remote control operation may
be impossible if there are any obstacles between the
unit and the remote control.
If the Remote Control is operated near other
products which generate infrared rays, or if other
remote control devices using infrared rays are used
near the unit, it may operate incorrectly. Conversely,
the other products may operate incorrectly.
For First-time use
The unit has a pre-installed lithium CR2025 battery.
Remove the protective tab to activate the remote
control battery.
16
All manuals and user guides at all-guides.com
To Replace the Remote Control Battery
1. Pull out the battery tray and remove the old
battery.
2. Place a new CR2025 battery into the battery tray
with correct polarity (+/-) as indicated.
3. Insert the battery tray back into the slot.
Precautions Concerning Batteries
long time (more than a month), remove the battery
from the Remote Control to prevent it from leaking.
the battery compartment and replace the batteries
with new ones.
them in fire or water.
objects. Doing so could cause batteries to short
circuit, leak or explode.
be a rechargeable type.
Install Batteries
Note:
When the Remote Control is not to be used for a
If the batteries leak, wipe away the leakage inside
Do not use any batteries other than those specified.
Do not heat or disassemble batteries. Never throw
Do not carry or store batteries with other metallic
Never recharge a battery unless it is confirmed to
• You can only use AC power as power supply.
Batteries ( not supplied ) are for backup
purpose.
• If the system is unplugged or if a power
failure occurs, all setups of the unit will be
erased unless there are batteries in the unit
and don't change them at this time. Once
setups had be erased, please resetup all items
( tuner stations; Source... ) which you desire.
USB Alarm Speaker
Publicidad
