Publicidad
Idiomas disponibles
Idiomas disponibles
Set the Alarm Timer
You can set two alarms which go off at different time.
1. Ensure that you have set the clock correctly.
2. Press and hold ALARM 1 or ALARM 2, [AL1
[AL2
] begin to blink.
3. Press
/
on the remote control to select an alarm
sound source: FM tuner, or buzzer.
4. Press ALARM 1 or ALARM 2. The hour digits
begin to blink.
5. Press
/
repeatly to set the hour.
6. Press ALARM 1 or ALARM 2. The minute digits
begin to blink.
7. Repeat steps 5-6 to set the minute.
8. Repeat steps 5-6 to select whether to ring alarm
the whole week, on weekdays, or at weekend.
9. Repeat steps 5-6 to set the alarm volume.
Activate and Deactivate the Alarm Timer
Press ALARM 1 or ALARM 2 repeatly to activate or
deactivate the timer.
- If the timer is activated, [AL1
displayed.
- If the timer is deactivated, [AL1
disappears.
Repeat Alarm
You can press to adjust the interval to repeat alarm.
When the alarm rings, press SNOOZE/DIMMER. The
alarm repeats ringing 9 minutes later.
Stop Alarm Ring
When the alarm rings, press the corresponding
ALARM 1 or ALARM 2. The alarm stops but the
alarm settings remain.
View the Alarm Settings
Press ALARM 1 or ALARM 2 to view the alarm
settings.
Set the sleep timer
This unit can switch to standby automatically after a
set period of time.
1. Press SLEEP repeatedly to select a set period of
time (in minutes).
- When the sleep timer is activated, the display show,
the volume will gradually decrease before the unit
power off.
18
All manuals and user guides at all-guides.com
2. Press SLEEP repeatedly until [OFF] is displayed.
- When the sleep timer is deactivated,
on the display.
Adjust Display Brightness
] or
Press DIMMER repeatedly to select different levels
of display brightness.
Adjust Volume Level
During play, press the VOL+/- buttons to increase/
decrease the volume level.
Select a Preset Sound Effect
During play, press the EQ button repeatedly to
select: [FLAT], [Pop], [Classic], [Rock], [Jazz].
Mute Sound
During play, press the MUTE button to mute or
restore sound. Press this button again to cancel the
effect.
Play from an External Audio Device
You can listen to an external audio device through
this unit.
] or [AL2
] is
] or [AL2
]
1. Connect the audio player.
Connect the LINE IN cable to the LINE IN socket on
the rear of unit and to the headphone socket on the
audio player.
2. Press the LINE IN button to select the LINE IN
source.
3. Start to play on the audio player.
disappears
USB Alarm Speaker
Publicidad
