Publicidad
Idiomas disponibles
Idiomas disponibles
1. Open the batteries compartment.
2. Install two AAA batteries(not supplied) with correct
polarity and the install steps as indicated.
3. Close the battery compartment.
Connect Power
Caution:
- Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
- Before connecting the AC power cord, ensure you
have completed all other connections.
Connect the AC power cord to the wall socket.
USB Charge
Connect a USB cable( not supplied) to USB
Charging socket from USB 1 or USB 2 to charge your
smartphone or tablet PC.
All manuals and user guides at all-guides.com
General Operation
Power
You can use all the functions on the top of the unit or
the remote control after connecting to power supply
(called Standby Mode).
Turn On
Press ON/OFF button to turn the system on from
standby mode.
SOURCE
Press
to select different functions.
When turning the system on, the system will
continue in the mode it was in when it was
turned off last time.
Turn Off
Press ON/OFF button on the unit or press the button
on the remote control again to turn the system off and
go to standby mode.
Be sure to unplug the power cord from the
outlet when the system is not in use for an
extended period of time.
Set Time
The built-in clock shows the correct time in the
display.
1. In standby mode, press and hold the CLOCK
button for some seconds, hour indicator will blink.
2. Set the hour with the
3. Press the CLOCK button to confirm, minute
indicator will blink.
4. Repeat steps 2-3 to set the minutes, day, month
and year.
In standby mode, press and hold the CLOCK
button for some seconds, then press the
PROG button to select 12/24 hour format.
button or
button.
ENGLISH
17
Publicidad
