Viewing Closed Captions(On-Screen Text Messages) - Analog
The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the
broadcasting signal, the Analog Caption function may operate on digital channels.)
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2
Press the ▲ or ▼ button to select Caption, then press the ENTER button.
3
Press the ENTER button to select Caption.
Press the ▲ or ▼ button to select On, then press the ENTER button.
4
Press the ▲ or ▼ button to select Caption Mode, then press the ENTER button.
Press the ▲ or ▼ button to select the submenu (Default, CC1~CC4, or Text1~Text4)
you want, then press the ENTER button.
Press the EXIT button to exit.
• CC1: The Primary Synchronous Caption Service. These are captions in the primary
language that must be in sync with the sound, preferably matched to a specific frame.
• CC2: The Special Non-Synchronous Use Captions. This channel carries data that is
intended to augment information carried in the program.
• CC3: Secondary Synchronous Caption Service. Alternate program-related caption
data, typically second language captions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2.
• Text1: First Text Service. This may be various non-program related data.
• Text2: Second Text Service. Additional data, usually not program related.
• Text3/Text4: Third Text Service. These data channels should be used only if Text1 and
Text2 are not sufficient.
➢
• The availability of captions depend on the program being broadcast.
• The Caption feature doesn't work in Component, PC, HDMI modes.
• When the Caption is not available to view, change the setup value to CC1 and such.
You can also press the CAPTION button on the remote control to select Captions On or
Off.
BP68-00626C_Eng-2.indd
52
English - 52
Caption
Caption
: On
Default
Caption Mode
: Default
CC1
Caption Options
CC2
CC3
CC4
Text1
Text2
Move
Enter
2007-03-13
ソタネト 4:58:14