Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions and Parts Manual
Getting To Know Your Brad Nailer Like A Pro
Bubble
Conversion Switch
Level
Trigger
Rubber Comfort
Grip
Rear Exhaust
Swivel Plug
Quick Clear Nose
Cover
Laser
Low Nail
Indicator
Light
Figure 6 - Components of the Brad Nailer
Adjustable
Depth Control
Thumbwheel
Pull-out
Warning
Decal
Nail Loading Area
Magazine
Latch
Features
Work Contact
Element (WCE)
aNtI-dry FIre
Tethered
This tool is equipped with an Anti-Dry
No-mar Tip
Fire feature. This prevents the Work
Contact Element (WCE) from being
pushed in when only a few nails remain.
No-mar Tip
Simply load new nail clip behind
Storage Post
remaining nails to continue shooting.
tetHered No-Mar
Low Nail
The tool is fitted with a no-mar tip which
Indicator
is tethered to the tool to prevent loss
Light
when not mounted to tool. To utilize the
no-mar tip, simply slide it over the tools
Battery Cover/
Compartment
WCE.
Electronics
loW NaIl INdICator lIgHts
ON / OFF
The tool is equipped with lights on either
Switch
side of the tool near the nose. When the
nail count becomes low, the lights will
Magazine
turn yellow. When the nail count is nearly
out, the Anti-Dry Fire feature will engage
and the lights will turn red. (See Loading
the Nailer section).
NaIl PlaCeMeNt laser PoINter
The tool is equipped with a laser mounted
near the nose. This can be seen through
the wide slots in the WCE and / or no-
mar tip. The laser will indicate exact
placement of the fastener.
emits laser radiation. Do not stare into beam
or view directly with optical instruments.
BuBBle level
The tool is equipped with a bubble level
located on the head cap. This will assist
in alighning the tool for level driving of
the fastener. The bubble level will assist
in vertical and horizontal positioning of
the tool.
CHN70200
This is a Class IIIA
Laser Product that
www.chpower.com
Publicidad
