Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Do not damage or pinch the cables when you fold or unfold
the handle.
7.3
INSTALL THE UPPER HANDLE
12
11
5
1. Align the holes in the upper handle (3) and the lower
handle (5).
2. Put the cam locks (12) through the holes.
3. Tighten the knobs (11) onto the cam locks.
4. Do the same operation on the other side.
There are two positions to choose while installing the upper
handle.
English
3
12
TIP
7.4
INSTALL THE SIDE DISCHARGE
CHUTE
14
13
CAUTION
When you use the side discharge chute,
•
Do not install the grass catcher.
•
Keep the mulch plug installed.
1. Open the side discharge door (13) and hold it.
2. Line up the recesses of the side discharge chute (4) below
the pivot (14).
3. Close the side discharge door.
7.5
SET THE CUTTING HEIGHT
The machine can be set to different cutting heights.
1. Pull the height adjustment lever rearward to increase the
cutting height.
2. Pull the height adjustment lever forward to decrease the
cutting height.
9
EN
4
Publicidad
