Publicidad
Idiomas disponibles
Idiomas disponibles
Care and Maintenance
Drain pump
Long-term care
If you will not use the dishwasher for an extended period of time, first drain the unit
completely, and then disconnect the water hose. Shut off the water supply valve and the
circuit breaker. Water remaining in the hoses or the internal components can damage the
dishwasher.
34
English
DW9900M_DD68-00196B-01_EN.indd 34
1
2
If the dishwasher fails to drain because the
drain pump is clogged with foreign matter
or there is an abnormal noise coming from
the drain pump, you must unclog and clean
the drain pump as instructed below.
1. Remove the lower rack.
2. See the Filter section to remove the
cylindrical micro filter. Then, remove
any moisture from the filter using a
sponge.
3. Remove the drain-pump cover by
pushing its handle in the arrow
direction (1), and then pulling up (2).
4. Check the impeller if it's in good
condition. Then, remove any impurities
from the pump.
5. Reinsert the drain-pump cover into
place, and then press it down until you
hear a clicking sound.
2017-09-04
12:05:22
Publicidad
