Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Symptom
Dishes are not dried
well.
The dishwasher is too
noisy.
38
English
DW9900M_DD68-00196B-01_EN.indd 38
Possible Cause
There is no rinse aid in the
dispenser, or not enough rinse
aid was used.
The water temperature is
low when the dishwasher is
operating.
Too many dishes have been
loaded.
Glasses and cups spilled water
onto other dishes while being
unloaded.
Auto Release™ is turned off.
The dishwasher makes a sound
when the dispenser cover is
open and the drain pump has
just started.
The dishwasher is not level.
Foreign material (screws,
plastic pieces) is in the pump
chamber.
The nozzle bumps against the
dishes, creating a chopping
sound.
Action
• Add a liquid type of rinse
aid. Check the rinse aid
settings.
• Connect the water supply
line to a hot water source.
Use rinse aid with the
Sanitize option.
• Proper loading of items can
affect drying performance.
Load your dishes as
recommended. See the
Loading dishes section on
page 13.
• Empty the lower rack
first, and then the upper
rack. This will avoid water
dripping from the upper
rack onto the dishes in the
lower rack.
• Turn Auto Release™ Dry on.
Press and hold Lower Rack
and Hi-Temp Wash for 3
seconds to access the Auto
Release™ menu. Select A1 to
activate Auto Release™ Dry.
• This is normal.
• Make sure the dishwasher is
level.
• Contact a qualified service
technician to remove
foreign materials from the
pump chamber.
• Rearrange the dishes.
2017-09-04
12:05:23
Publicidad
