Teka HLF 924 Manual Del Usuario página 27

electrical safety
• In order to connect the oven
to the mains, the technician
should use an Ho5RR-F,
H05ss-F or H07RN-F power
cable. The connection dia-
gram is shown in the figure.
• The oven must always have
a good earth connection that complies with current regula-
tions.
• Connection must be made by means of an omnipolar switch
that is suitable for the current drawn and with a minimum
aperture between contacts of 3 mm for disconnection in
case of emergency, cleaning or bulb changing. Under no cir-
cumstances must the earth wire pass through this switch.
• This switch may be replaced by a plug, provided it is acces-
sible for normal use.
• any handling or repair to the appliance, including replace-
ment of the power cable, should be carried out by author-
ised Technical service personnel using original spare parts.
Repairs or handling by others may damage the appliance or
cause malfunctioning that could be hazardous to your safe-
ty.
• Unplug your oven if it malfunctions.
• ovens should only be fitted under those worktops recom-
mended by the manufacturer.
Figure
English
User Guide for Gas Oven
27