Publicidad
Idiomas disponibles
Idiomas disponibles
Change the Side Burner Orifice
1.
Remove the two screws from the bracket and remove the
bracket.
2.
Use a 6 mm socket and wrench or a 6 mm nut driver to
remove the orifice and replace with the natural gas orifice.
IMPORTANT: Check that the NG orifice is properly
installed inside of the valve.
3.
Reinstall the two screws and the bracket.
4.
Reinstall the two thumb screws.
5.
Reconnect the quick connector.
6.
Open the manual shutoff valve in the gas supply. The
valve is open when the handle is parallel to the gas pipe.
7.
Test all connections using an approved noncorrosive
leak-detection solution. Bubbles will show a leak. Correct
any leak found
Record Conversion
The LP appliance nameplate is located inside the grill cabinet
on the left-hand side. Once converted, place the NG appliance
nameplate over the current LP appliance nameplate.
In the last page of the Use and Care Guide, write "Converted
to Natural Gas". Also record the conversion date and the
technician/company that performed the conversion.
28
A.
Closed valve
B.
Open valve
Publicidad
