Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
through the remote control, the receptor
included with this device must be installed
before, as explained in the installation
section of this manual.
To use the remote control, you must add 2
batteries to the bottom of the remote.
If your model has LED light with different
colour tones, you can change the colour
temperature of the light by switching it on
and off with the wall switch, the remote
control or, in case of a smart fan, from your
terminal. See picture 08 on page 8.
Each
associated with the receiver
included with the fan.
When you turn off the fan with
the remote controller, the light
settings will be saved according
to the last option you selected.
For example, if the light is set to
the "warm" position when you turn off the
fan, when you turn on the fan again with
the remote controller the light will be set to
"warm" again. However if you turn on/off
the fan with the wall switch the settings
will not be saved and the light will turn on
according to the default settings (some
models do save the settings when using
the wall switch)
First use:
• Switch it on.
• Check the speed and light (if your
model has it)
Using the product with the switch and
the remote controller:
• You cannot control speed with the wall
switch. The wall switch only allows
you to turn it on. Speed can only be
selected with the remote controller.
• You can use the switch to turn on/off
the light. Depending on your model,
light:
• Will automatically turn on when
you press the switch.
30
remote
control
• Turn the light on with the remote
controller and then press the switch.
The light will turn off and the settings
will be saved for the next time you
use it. You can check these settings
by pressing the switch again.
Winter function:
This option involves reversing the blades
to distribute the hot air that accumulates
against the ceiling, allowing continued use
of your fan throughout the year.
To use this function simply press the
remote control button.
is
WiFi. Smartphone:
This model has WiFi function, so you
can control it using your mobile phone
(smartphone)
Follow the instructions included in the
user manual "APP connect manual" to
install the app and control the device.
Remember your mobile device must be
connected to the local WiFi network to be
able to connect with your new ceiling fan.
CLEANING AND MAINTENANCE
This product does not require a great deal
of maintenance. To clean, please follow the
instructions below:
• Unplug the fan first and wait until it
comes to a complete stop.
• Use only a soft damp cloth.
• Do not use abrasive cleaners.
• If you are not going to use the fan
for some time, it is recommended to
remove the batteries from the remote
control and store it in a clean and dry
place.
TROUBLE SHOOTING
Occasionally you can solve yourself some
failures in your appliance. Check the
Problem-Solution chart included in this
manual. See table 02 on page 10.
Publicidad
